Aluminium Test Point Boxes

 

Test Point in the field test-point-box

test-point-box-with-upstand

DESCRIPTION

AMAC manufacture cast aluminium test point boxes for the monitoring of protected pipelines and structures (above and below ground).


APPLICATION(S)

Test point boxes allow field staff to quickly assess the protection levels using a half cell potential test while allowing the connection of a data logger for longer term potential, current measurement and monitoring.

  

TECHNICAL INFORMATION

AMAC pipe mounted test point boxes are manufactured from corrosion resistant aluminium (grade BP401 or AA601 suitable for use in non-coastal areas. All test points come with a threaded hole in the base for mounting/cable entry.

Faceplates can be either Lexan XL polycarbonate or aluminium and can be customised to required specifications.

Also available are upstands and baseplates to suit.

Our standard aluminium sizes are as follows:
TP1 – 125mm wide x 125mm tall x 95mm thick
TP3 – 160mm wide x 235mm tall x 95mm thick
TP5 – 260mm wide x 260mm tall x 125mm thick