Cast Iron Test Point Boxes

 

Test Point in the field test-point-box

test-point-box-with-upstand

DESCRIPTION

AMAC manufacture cast iron test point boxes for the monitoring of protected pipelines and structures (above and below ground), in conditions where standard aluminium boxes are not suitable.



APPLICATION(S)

Test point boxes allow field staff to quickly assess the protection levels using a half cell potential test while allowing the connection of a data logger for longer term potential, current measurement and monitoring.

 

 TECHNICAL INFORMATION

AMAC pipe mounted test point boxes are manufactured from galvanised cast iron (suitable for use in coastal areas). All test points come with a threaded hole in the base for mounting/cable entry.

Faceplates can be either Lexan XL polycarbonate or aluminium and can be customised to required specifications.

Also available are upstands and baseplates to suit.

Our standard cast iron sizes are as follows:
TP1 – 125mm wide x 125mm tall x 95mm thick
TP2 – 215mm wide x 310mm tall x 115mm thick